ld Manual

ld Diagnostic Messages
ld Manual—529650.001
3-46
Nonfatal Errors
Cause. ld, in processing a -change command, could not read the program headers
of the indicated file.
Effect. ld continues but a loadfile will not be created.
Recovery. Check the file to ensure that it is a valid PIC loadfile. If so, call HP.
Cause. ld, in processing a -change command, could not read the Tandem Info
section of the indicated file.
Effect. ld continues but a loadfile will not be created.
Recovery. Check the file to ensure that it is a valid PIC loadfile. If so, call HP.
Cause. ld, in processing a -change command, could not process the TandemInfo
section of the indicated file.
Effect. ld continues but a loadfile will not be created.
Recovery. Check the file to ensure that it is a valid PIC loadfile. If so, call HP.
Cause. ld, in processing a -change command, could not process the Program
Header section of the indicated file.
Effect. ld continues but a loadfile will not be created.
Recovery. Check the file to ensure that it is a valid PIC loadfile. If so, call HP.
Cause. The libname specified in the -change libname command is greater than 48
bytes long.
Effect. ld continues but a loadfile will not be created.
Recovery. Shorten the libname to 48 bytes
**** ERROR **** [20194]:
I/O Error: Failed to load Tandem Info section from file name.
**** ERROR **** [20195]:
Failed to process Tandem Info Section due to possible
corruption from file name.
**** ERROR **** [20196]:
Failed to process Program Header Section due to possible
corruption from file name.
**** ERROR **** [20197]:
libname attribute value for the -change option is too long.