M8505 Tabletop Tape Drive Installation and User's Guide

Specifications
M8505 Tabletop Tape Drive Installation and User’s Guide—541949-002
A-2
Power
Power
This tables lists power specifications for the tape drive.
Technical Specifications
This table lists technical specifications for the tape drive.
Table A-2. Power for Tape Drive
Input voltage 100-240 Vac +/- 10% full range
Input frequency 50 - 60 Hz
Input current 1.5 A (Max)
Maximum inrush current 60 A maximum for 230 Vac
30 A maximum for 115 Vac (at cold start)
Output Voltage Load Tolerance +/- Ripple and
Noise
Regulation
+05 Vdc 0.0 A minimum
5.0 A maximum
3 % 50 m V Line 2%
Load 3%
+12 Vdc 0.0 A minimum
1.9 A maximum
10% 120 m V Line 2%
Load 10%
Table A-3. Technical Specifications
Tape format Ultrium generation 3
Tape media Read/Write Ultrium 2/3, Read Ultrium 1
Cartridge capacity 400 gigabytes native; up to 800 gigabytes compressed
Data transfer rate 40 megabytes per second native, 80 megabytes per second
compressed
Buffer size 128 megabytes
Data access time 53 seconds from beginning of media (average)
Rewind tape speed 7.0 m/s
Interface Multimode short wave fiber-optic
Plug type LC/LC