M8609A Tabletop Tape Drive Installation and User's Guide (H06.14+, J06.03+)

Installing and Configuring the Tape Drive for the
NonStop NS-Series Server
M8609A Tabletop Tape Drive Installation and User’s Guide—546013-001
2-4
Installation
5. Connect the other end of the fiber-optic cable to the Fibre Channel ServerNet
adapter (FCSA) on the NonStop NS-series server. See Figure 2-4 for the location.
6. Attach the power cord to the tape drive’s AC power receptacle (see Figure 2-3 on
page 2-3 for the location) and then plug the other end into an AC power outlet.
7. Toggle the power switch to the on position from the rear of the unit. See Figure 2-3
on page 2-3 for the location.
Figure 2-4. View of Two FCSAs at Rear of Server
Note. The tape drive does not have protection against lightning surges. Customers in high-risk
areas should use external surge protection rated for use in their location and be able to handle
the power demand of the tape drive.
Fiber-Optic Cables