M8609A Tabletop Tape Drive Installation and User's Guide (H06.14+, J06.03+)

Specifications

M8609A Tabletop Tape Drive Installation and User’s Guide—546013-001

A-2

Power

This tables lists power specifications for the tape drive.

Technical Specifications

This table lists technical specifications for the tape drive.

Table A-2. Power for Tape Drive

Input voltage 100-240 Vac +/- 10% full range

Input frequency 50 - 60 Hz

Input current 1.5 A (Max)

Maximum inrush current 60 A maximum for 230 Vac

30 A maximum for 115 Vac (at cold start)

Output Voltage Load Tolerance +/- Ripple and

Noise

Regulation

+05 Vdc 0.0 A minimum

5.0 A maximum

3 % 50 m V Line 2%

Load 3%

+12 Vdc 0.0 A minimum

1.9 A maximum

10% 120 m V Line 2%

Load 10%

Table A-3. Technical Specifications

Tape format Ultrium generation 4

Tape media Read/Write Ultrium 3/4, Read only Ultrium 2

Cartridge capacity 800 gigabytes native; up to 1.6 terabytes compressed

Data transfer rate Up to 120 megabytes per second native

Up to 240 megabytes per second compressed

Buffer size 128 megabytes

Data access time 53 seconds from beginning of media (average)

Rewind tape speed 7 m/s

Interface Multimode short wave fiber-optic

Plug type LC/LC