Native Inspect Manual (H06.03+)

About This Manual
Native Inspect Manual—528122-003
x
Organization
Organization
Notation Conventions
Hypertext Links
Blue underline is used to indicate a hypertext link within text. By clicking a passage of
text with a blue underline, you are taken to the location described. For example:
This requirement is described under Backup DAM Volumes and Physical Disk
Drives on page 3-2.
General Syntax Notation
This list summarizes the notation conventions for syntax presentation in this manual.
UPPERCASE LETTERS. Uppercase letters indicate keywords and reserved words. Type
these items exactly as shown. Items not enclosed in brackets are required. For
example:
MAXATTACH
lowercase italic letters. Lowercase italic letters indicate variable items that you supply.
Items not enclosed in brackets are required. For example:
file-name
Table i. Contents of the Native Inspect Manual
Section Description
1, Introducing Native Inspect
Describes the basic principles of using Native Inspect
to debug TNS/E native processes and snapshot files.
2, Using Native Inspect
Presents a sample session using Native Inspect to
debug a TNS/E native process.
3, Syntax of Native Inspect
Commands
Lists Native Inspect commands in related groupings
and gives syntax for all the Native Inspect commands
and command-line options.
4, Using Tcl Scripting
Describes the commands of the Tool Command
Language (Tcl)
Appendix A, Command Mapping
With Debug and Inspect
Lists Debug and Inspect commands with their Native
Inspect equivalents.
Glossary
Lists and defines terms used in this manual.