Native Inspect Manual (H06.03+)

Contents
Native Inspect Manual—528122-003
vi
4. Using Tcl Scripting (continued)
4. Using Tcl Scripting (continued)
Native Inspect Commands Implemented in Tcl 4-2
Loading a Tcl Script 4-2
Using Variables Defined in a Tcl Script 4-3
Programming Native Inspect Tcl Commands 4-3
Namespaces and Package Loading Rules 4-3
Tcl Examples 4-5
Tcl Commands Provided by Native Inspect 4-8
A. Command Mapping With Debug and Inspect
Glossary
Index
Figures
Figure 1-1. Native Inspect Runs in Same CPU as Current Process 1-7
Figure 1-2. Debugger Selection for a TNS/E Native Process 1-10
Figure 1-3. Debugger Selection for a TNS Process Running on TNS/E 1-11
Tables
Table i. Contents of the Native Inspect Manual x
Table 1-1. Three Debuggers on TNS/E Systems 1-3
Table 1-2. Event Handling by Native Inspect 1-21
Table 2-1. Principal Native Inspect Commands With Inspect Equivalents 2-1
Table 3-1. Commands of Native Inspect 3-1
Table 3-2. TNS/E Signal Names 3-50
Table 3-3.
TNS/E Register Names 3-61
Table 4-1.
Tcl Commands for NonStop TNS/E Systems 4-8
Table A-1. Debug Commands and Equivalent Native Inspect Commands A-1
Table A-2. Inspect Commands and Equivalent Native Inspect Commands A-2