Native Inspect Manual (H06.04+)

Syntax of Native Inspect Commands
Native Inspect Manual—528122-005
4-82
x command
last address examined, and $__ stores the contents of that address formatted as
specified in the command.
Examples
To display memory at address 0x70000fc0 and then display three machine
instructions starting at that address:
To display memory at an address:
To display memory referenced by a pointer:
To display instructions relative to the current location:
(eInspect 7,464):x 0x70000fc0
0x70000fc0:0 <func_1+416>: 0x0900cc68
(eInspect 7,464):x /3i 0x70000fc0
0x70000fc0:0 <func_1+416>: [MMI] st4 [r52]=r51
0x70000fc0:1 <func_1+422>: addl r53=192,r1
0x70000fc0:2 <func_1+428>: nop.i 0x0;;
(eInspect 0,794):x /20c 0x70000ca8
0x70000ca8 <__STRING$4>: 109 'm' 111 'o' 110 'n'
105
'i' 116 't' 111 'o' 114 'r' 0 '\000'
0x70000cb0 <__STRING$6>: 102 'f' 114 'r' 101 'e'
100
'd' 0 '\000' 0 '\000' 0 '\000' 0 '\000'
0x70000cb8 <__STRING$5>: 100 'd' 112 'p' 50 '2'
0 '\
000'
(eInspect 0,794):x /5xw pcbAttribute
0x8004ee0: 0x00030000 0x00000005 0x00000000 0x00000000
0x8004ef0: 0x00000000
(eInspect 0,794):x /5b pcbAttribute
0x8004ee0: 0x00 0x03 0x00 0x00 0x00
(eInspect 3,663):x /5i $ip
0x70002bf0:0 <pcbDataStructs_initialize+2256>: [MMI] break.m 0x2a;;
0x70002bf0:1 <pcbDataStructs_initialize+2262>: ld8 r35=[r34]
0x70002bf0:2 <pcbDataStructs_initialize+2268>: nop.i 0x0;;
0x70002c00:0 <pcbDataStructs_initialize+2272>: [MMI] adds r36=4,r35;;
0x70002c00:1 <pcbDataStructs_initialize+2278>: adds r37=44,r36