Native Inspect Manual (H06.07+)

Syntax of Native Inspect Commands
Native Inspect Manual—528122-006
4-51
map-source-name command
Examples
To display the memory access breakpoint:
To set a MAB by address:
To set a MAB on 4 bytes at a given address:
To set a MAB on variable j when it changes:
To set a “change” MAB:
map-source-name command
Defines file-name mapping rules between source file names at compilation time and at
debug time. map is an alias for map-source-name.
Related Commands: Use the dir command to append a directory (subvolume) to the
search path used to locate source files. Use the unmap-source-name command to
delete an existing mapping rule.
(eInspect 1,480):mab
MAB
addr = 0x080000e0
segid = 65535
mabtype = 2
global = 0
haltloop = 0
length = 1
There is no global MAB set
(eInspect 3,880): mab *0x8000370
(eInspect 3,880): c
Continuing.
Process (3, 880) received DS_EVENT_MAB (seg:65535, addr:0x08000370,
pc:0xa4bd4c1
1ea887459, len:-233208559 type:1)
0x700024e0:2 in pcbDataStructs_initialize ()
at \SIERRA.$YOSE1.SYMBAT1.SCXXTST:350
350 for (PCBList.count=0 ; PCBList.count < PCBLIST_MAX; PCBList.count++)
(eInspect 1,480): mab
*0x00000070 4
(eInspect 1,480): mab j -c
(eInspect 1,480):mab PCBList.count -c
map-source-name|map [ [ source-name ] = alias-name ] |
[ source-prefix = alias-prefix ]