Native Inspect Manual (H06.13+, J06.03+)

{da|disassemble} [[start-address][end-address] | function-name]
Where:
start-address
Specifies the starting address of the range of instructions to display.
end-address
Specifies the ending address of the range of instructions to display.
function-name
Specifies a function to display.
NOTE: You can use the x command to display a specified number of instructions starting at
a specified address.
Example
To display instructions for a function:
(eInspect 3,663): da PCB_addAttribute
Dump of assembler code for function PCB_addAttribute:
;;; File: \SIERRA.$YOSE1.SYMBAT1.SCXXTST
239 {
0x70001820:0 <PCB_addAttribute>: [MII] alloc r34=ar.pfs,30,30,0
0x70001820:1 <PCB_addAttribute+6>: adds r12=-96,r12
0x70001820:2 <PCB_addAttribute+12>: nop.i 0x0;;
0x70001830:0 <PCB_addAttribute+16>: [MMI] adds r27=32,r12
0x70001830:1 <PCB_addAttribute+22>: nop.m 0x0
0x70001830:2 <PCB_addAttribute+28>: nop.i 0x0;;
0x70001840:0 <PCB_addAttribute+32>: [MII] stf.spill [r27]=f2
0x70001840:1 <PCB_addAttribute+38>: mov r35=r32
0x70001840:2 <PCB_addAttribute+44>: mov r36=r33
0x70001850:0 <PCB_addAttribute+48>: [MMI] adds r37=48,r12;;
0x70001850:1 <PCB_addAttribute+54>: st8 [r37]=r35
0x70001850:2 <PCB_addAttribute+60>: nop.i 0x0
0x70001860:0 <PCB_addAttribute+64>: [MMI] adds r38=56,r12;;
0x70001860:1 <PCB_addAttribute+70>: st8 [r38]=r36
0x70001860:2 <PCB_addAttribute+76>: nop.i 0x0
240 pcb->attribute[ pcb->attributeCount++ ] = pcbAttribute;
0x70001870:0 <PCB_addAttribute+80>: [MMI] adds r39=60,r12;;
0x70001870:1 <PCB_addAttribute+86>: ld4 r40=[r39]
0x70001870:2 <PCB_addAttribute+92>: nop.i 0x0
...
NOTE: The output offsets are specified in hexadecimal.
display Command
Specifies an expression that is to be automatically evaluated and the result displayed each time
the program is suspended.
If you do not specify any arguments, Native Inspect displays the expressions currently on the
automatic display list.
display [[/format] expression]
Where:
/format
An optional count, format, and size specification. See Syntax of /format (page 63).
expression
Evaluates the expression and adds it to the list of expressions to be evaluated. See Syntax of
expression (page 62).
76 Native Inspect Command Syntax