NonStop Development Environment for Eclipse 4.0 Debugging Supplement

1. To specify arguments for the run command used to launch the application under debugger
control, enter them in the box below Run command options (newlines treated as spaces):. The
syntax used for these arguments must be valid for the option selected for NonStop launch type:
in the Main tab; either OSS or Guardian. For the Guardian launch type, you are not required
to use opening and closing forward slashes. NSDEE does not validate this syntax.
This example shows run command arguments, all on the same line, for an application that
has an OSS launch type:
-gpri=149 -cpu=2
This example shows run command arguments, each on a separate line, for an application
that has an OSS launch type:
-gpri=149
-cpu=2
This example shows run command arguments, all on the same line, for an application that
has a Guardian launch type. The opening and closing slashes (/) are optional:
/PRI 149, CPU 2/
This example shows run command arguments, each on a separate line, for an application
that has a Guardian launch type. The opening and closing slashes (/) have been omitted (they
are optional):
PRI 149,
CPU 2
NOTE:
• The debug, nowait, and term options are not supported.
• You can use the cpu option to specify on which processor the application and the
debugger should run. If you specify this option, it is used for both the debugger and the
target application. If you do not use the cpu option, the application and debugger are
run in a processor that is chosen by the system.
2. To specify arguments to pass to the application, enter them in the box below Program
arguments (newlines treated as spaces):. The syntax used for these arguments must be valid
for the program being debugged. NSDEE does not validate this syntax.
3. By default, your home directory is used as the working directory. To specify a directory other
than your home directory:
• For OSS launch types, select Set working directory:. For Guardian launch types, select
Set initial $volume.subvolume:
• Enter the full path and directory name in the box or click Browse... to locate and select
the directory or volume and subvolume you want to use.
4. Click Apply to apply your changes. To revert to the settings in effect the last time changes
were applied, click Revert.
Considerations
For run command options and program arguments:
• You can enter program and run command arguments one per line for easy reading or you
can enter all of the arguments on a single line, but the syntax you use must be valid for the
option selected under NonStop launch type: in the Main tab; either OSS or Guardian. NSDEE
does not validate this syntax.
• For the Guardian launch type, you are not required to use opening and closing forward
slashes.
Creating or modifying debug configurations 17