NonStop Development Environment for Eclipse 4.0 Debugging Supplement

Figure 5 Environment tab for NonStop Application debug configurations, OSS launch type
NonStop Attach Process debug configurations
Creating a new NonStop Attach Process debug configuration
1. Open the Debug Configurations dialog. For example, from the main toolbar, select Run→Debug
configurations.
2. The list in the left side of the Debug Configurations dialog shows the types of debug
configurations you can create in addition to the names of debug configurations that have
already been created in this workspace. In this list, double-click the NonStop Attach Process
configuration type. A new debug configuration appears below the debug configuration type
with the default name New_configuration. In the next steps in this procedure, use the tabs
on the right side of the Debug Configurations dialog (see Figure 2) to edit your new
configuration. When you finish entering the information for each tab, click Apply to apply
your changes or Revert to revert to the settings in effect the last time changes were applied,
or go on to the next tab and click Apply when you are ready to apply your changes to all
tabs. If the Debug button is available and you click Debug, your changes are applied before
the debugger is launched.
TIP: If you already have configured another NonStop Attach Process debug configuration,
you can copy it and modify the copy to create your new NonStop Attach Process debug
configuration. However, that debug configuration must already have the correct launch type.
20 Debugging tasks