NonStop Development Environment for Eclipse 4.0 Debugging Supplement

2. Add one or more path mappings to the container:

a. Select the path mapping container (by default, named either Local Path Mapping: New

Mapping or Remote Path Mapping: New Mapping).

b. Click Edit.... Depending on the type of mapping you selected, either the Local Path

Mappings dialog or the Remote Path Mappings dialog appears.

c. (Optional) Change the name of the mapping container by editing the Name: box.

d. Click Add.... If you chose a local path mapping, the Local Path Mapping dialog appears.

If you chose a remote path mapping, the Remote Path Mapping dialog appears.

e. In Compilation path:, enter the portion of the original compile-time path that you want to

replace.

f. In the bottom box, enter replacement path or click Browse... to locate and select the

system path.

g. Click OK to apply your changes and close the dialog.

h. Either click OK to apply your changes and close the Local Path Mappings dialog or the

Remote Path Mappings dialog, or go to step d to add another path mapping to this

container.