NonStop Development Environment for Eclipse Debugging Supplement

TIP: If you already have configured another NonStop Attach Process debug configuration,
you can copy it and modify the copy to create your new NonStop Attach Process debug
configuration.
Figure 6 Main tab for NonStop Attach Process debug configurations
3. In the Name: box, type a name for this debug configuration, or use the default name,
New_configuration.
4. In the Main tab, configure these settings:
a. For NonStop launch type: select Guardian if your application is a Guardian application
or select OSS if your application is an OSS application.
b. For NonStop project:, specify the NonStop development project that was used to build
the application. Type the name of the project in the box or click Browse... to locate and
select the project using the “Project Selection dialog” (page 42).
c. For NonStop system:, specify the system on which the process is running. Choose a
previously-configured system by selecting a system from the drop-down list, or configure
a new system by clicking Edit... and using the Configure Connections dialog to configure
the remote connection. For more information about the Configure Connections dialog,
see the NonStop Development Environment for Eclipse User Guide.
Creating or Modifying Debug Configurations 21