NonStop NS-Series Operations Guide (H06.03+)

Processors and Components: Monitoring and
Recovery
HP Integrity NonStop NS-Series Operations Guide—529869-001
9-13
Reloading a Single Processor on a Running Server
8. Check the OutsideView window for status messages, which will report successes
or errors during the load. Monitor the state of the processor you are loading until it
is executing the NonStop Kernel operating system.
9. If the load fails, check the parameters and reload the processor. If the load fails
again, contact your service provider.
Using the OSM Service Connection to Perform Reload
The OSM Service Connection provides a Reload action on the Logical Processor
object. You can perform the action on a single or multiple processors. The OSM action
lets you reload an entire processor or omit a slice from the reload action so you can
dump the PE for that slice before reintegrating it into the running processor.
•
To reload a single processor:
1. Select the Logical Processor object for the processor you want to reload.
2. Right-click and select Actions.
3. Select Reload, click Perform action.
4. Click OK to the dismiss the confirmation dialog box.
5. In the Logical Processor Reload Parameters dialog box, select the appropriate
options. See OSM online help for information about the options.
6. Click OK.
•
To reload a multiple processors, use the Multi-Resource Actions dialog box
(available from the Display menu of the OSM Service Connection).
1. In the Multi-Resource Actions dialog box, select Logical Processor from the
Resource Types list. All Logical Processors in the system will be displayed in
the right-hand pane.