NonStop NS-Series Operations Guide (H06.03+)

Determining Your System Configuration
HP Integrity NonStop NS-Series Operations Guide—529869-001
2-12
Displaying SCF Configuration Information for
Subsystems
To get detailed configuration information in command format for all tape drives on the
system, issue this command:
-> INFO TAPE $*,OBEYFORM
ServerNet LAN Systems Access (SLSA) Subsystem
Before using commands listed in Table 2-5, type this command to make the SLSA
subsystem the default object:
> SCF ASSUME PROCESS $ZZLAN
The SLSA subsystem provides access to parallel LAN and WAN I/O for Integrity
NonStop servers. The SLSA subsystem provides access to Ethernet, token-ring, and
multifunction I/O board Ethernet adapters and to the ServerNet wide area network
(SWAN) concentrator.
When displaying configuration files for adapter and LIF devices in the SLSA
subsystem, you can use the OBEYFORM option with the INFO command to display
currently defined attribute values in the format that you would use to set up a
configuration file. Each attribute appears as a syntactically correct system configuration
command. For example:
ADD ADAPTER $ZZLAN.E0154, &
LOCATION (1 , 1 , 54 ) , &
TYPE G4SA, &
ACCESSLIST (0, 1)
Table 2-5. Displaying Information for the SLSA Subsystem ($ZZLAN)
To Display Information About These
Configured Objects Enter This Command
The SLSA subsystem manager LISTDEV SLSA
All SLSA subsystem object and process
names
NAMES $ZZLAN
All configured adapters, with
group/module/slot and adapter type
INFO ADAPTER *
A specific adapter INFO ADAPTER adapter, DETAIL
All logical interface (LIF) names, with
associated MAC addresses, associated
physical interface (PIF) names, and port
types
INFO LIF *
A specific LIF INFO LIF lifname, DETAIL
A specific PIF INFO PIF pifname, DETAIL
All ServerNet addressable controller (SAC)
names
INFO SAC *
A specific SAC INFO SAC sacname.n, DETAIL