NonStop NS-Series Operations Guide (H06.04+)

HP Integrity NonStop NS-Series Operations Guide—529869-002
xiii
What’s New in This Manual
Manual Information
HP Integrity NonStop NS-Series Operations Guide
Abstract
This guide describes how to perform routine system hardware operations for HP
Integrity NonStop™ NS-series servers. These tasks include monitoring the system,
performing common operations tasks, and performing routine hardware maintenance.
This guide is written for system operators.
Product Version
N.A.
Supported Release Version Updates (RVUs)
This guide supports H06.04 and all subsequent H-series RVUs until otherwise
indicated by its replacement publication.
Document History
New and Changed Information
Updated manual to incorporate slice to Blade terminology changes.
•
Changed slice to Blade Element under Monitoring Processors Automatically Using
TFDS on page 9-4.
•
Changed slice to Blade Element and changed Slice Firmware object to Blade
Element Firmware object under Monitoring Processor Status Using the OSM
Service Connection on page 9-5
•
Changed slice to Blade Element under Recovery Operations for Processors on
page 9-9.
•
Changed slice to Blade Element under Recovery Operations for a Processor Halt
on page 9-9
•
Changed slice to Blade Element Reloading a Single Processor on a Running
Server on page 9-10.
Part Number Published
529869-002 November 2005
Part Number Product Version Published
529869-002 N.A. November 2005
529869-001 N.A. July 2005