NonStop NS-Series Operations Guide (H06.04+)

What’s New in This Manual
HP Integrity NonStop NS-Series Operations Guide—529869-002
xiv
New and Changed Information
•
Changed slice to Blade Element and changed the OMITSLICE parameter to the
OMITBLADE parameter under Using TACL RELOAD to Perform Reload on
page 9-11
•
Changed slice to Blade Element under Using the OSM Service Connection to
Perform Reload on page 9-13.
•
Changed slice to Blade Element under Recovery Operations for a System Hang on
page 9-14.
•
Changed slice to Blade Element and changed the SLICE ALL parameter to the
BLADE ALL parameter under Dumping a Processor to Disk on page 9-15.
•
Changed the SLICE parameter to the BLADE parameter under Using RCVDUMP
to Dump a Processor to Disk on page 9-17.
•
Changed Slice Reintegration to Blade Element Reintegration on page 9-18.
•
Changed slice object to Blade Element object under Replacing Processor Memory
on page 9-19.
•
Changed Replace Slice Procedure to Replace Blade Element Procedure under
Related Reading on page 9-22 and changed the OSM Service Connection Slice
Replace action to the OSM Service Connection Blade Element Replace action.
•
Changed processor slices to processor Blade Elements under Powering On a
System on page 15-2.
•
Changed processor slices to processor Blade Elements under Powering On the
System From a No Power State on page 15-3.
•
Changed slice to Blade Element and referred to the Select Blade Element (rather
than the Select Slice) drop-down menu in the Processor Element Dump Settings
field under Performing a System Load From a Specific Processor on page 15-11.
•
Changed slice to Blade Element under Reloading Processors Using OSM on
page 15-12.
•
Changed references to CSSI in the following places, indicating that the Support
and Service Library provides service procedures.
°
Support and Service Library on page -xviii
°
Service Procedures on page 1-13
°
Support and Service Library on page 1-13
°
Recovery Operations for Problems Detected by OSM on page 3-12
°
Table 10-3, Common Recovery Operations for Disk Drives, on page 10-12
°
Monitoring Tape Drive Status With OSM on page 11-2
°
Related Reading on page 11-9
°
Maintain Batteries on page 14-4