NonStop NS-Series Operations Guide (H06.04+)

Tools and Utilities for Operations
HP Integrity NonStop NS-Series Operations Guide—529869-002
B-3
File Utility Program (FUP)
File Utility Program (FUP)
The File Utility Program (FUP) is a component of the standard software package for
the NonStop Kernel operating system. FUP software is designed to help you manage
disk files, nondisk devices (printers, terminals, and tape drives), and processes
(running programs) on the Integrity NonStop system. You can use FUP to create,
display, and duplicate files; load data into files; alter file characteristics; and purge files.
Measure
Use the Measure program to collect and display system performance statistics about
processors, processes, communication and network lines, files, disks, and terminals.
Operations management personnel often use Measure to help fine-tune and balance a
system.
MEDIACOM
MEDIACOM is the operator interface to the Distributed Systems Management/Tape
Catalog (DSM/TC). It allows you to perform routine tape and tape-drive management
operations.
NonStop NET/MASTER
NonStop NET/MASTER is used to integrate system and network management
services. It serves as an alternative to the ViewPoint console application.
NSKCOM and the Kernel-Managed Swap
Facility (KMSF)
NSKCOM is the command interface to the Kernel-Managed Swap Facility (KMSF).
NSKCOM allows you to configure and manage permanently allocated swap files.
OSM Package
The HP Open System Management (OSM) product is the system management tool for
Integrity NonStop systems. OSM offers a browser-based interface that improves
scalability and performance and overcomes other limitations that existed in TSM. OSM
has been enhanced for H06 to support the TNS/E platform and monitors the processor
switch (p-switch) and the disk drive enclosures. The OSM Low-Level Link has a new
System Load dialog specifically for Integrity NonStop servers.
TSM is no longer supported. OSM applications perform all of the same functions that
TSM did.