NonStop NS-Series Operations Guide (H06.12+)

option is one of these:
NOSWITCH
[PRIME|NOPRIME]
fabric OMITBLADE
[A|B|C] $volume
[.sysnn.osdir]
NOSWITCH specifies that, when a
processor is reloaded,
there is no default
autoswitch of controller
ownership to the
configured primary
processor.
[PRIME|NOPRIME] Sets up the logical
processor for the reload
operation. NOPRIME is
the default.
fabric specifies whether the X
fabric or Y fabric is used
for the transfer of the
operating system image
to the processor during
the RELOAD operation.
0 = X fabric 1 = Y fabric
The default option is
the X fabric.
OMITBLADE [A|B|C] The PE on the selected
Blade Element will not
be reloaded when other
PEs in that logical
processor are reloaded.
If you do not provide
an argument (A or B or
C) the system will
choose a Blade Element
to omit.
$volume [.sysnn.osdir] specifies a volume other
than $SYSTEM where
the operating system
image (sysnn.osdir) to
be used for reloading
the processor is located.
Depending on your
requirements, this
specification could take
the form of $volume or
$volume.sysnn.osdir or
sysnn.osdir or osdir.
* specifies that all failed
processors should be
reloaded.
Recovery Operations for Processors 113