NonStop NS-Series Operations Guide (H06.12+)

2. Select Session > New. The New Session Properties dialog box appears.

3. On the Session tab, in the Session Caption box, type a session caption name such as Startup

Events or Startup TACL.

4. Click IO Properties. The TCP/IP Properties dialog box appears.

5. Type the DNS name or IP address of the maintenance entity (ME) or integrated maintenance

entity (IME), followed by a space, and the port number of the window type (303 for the

startup event stream window, and 301 for the startup TACL window).

For example, for the startup event stream window:

me-system1- G100-M02 303

me-system1- G100-M03 303

192.231.36.2 303

Then, for the startup TACL window:

me-system1- G100-M02 301

me-system1- G100-M03 301

192.231.36.2 301

6. Click OK. The TCP/IP Properties dialog box closes, and you are returned to the New Session

Properties dialog box.

7. Click OK. The startup event stream window or startup TACL window appears. A TACL

prompt appears in the startup TACL window.

Consult the OSM Event Viewer for any important system startup messages logged to the EMS

log that you might have missed while opening the terminal-emulation windows.

NOTE: OSM Low-Level Link version T0633AAT and later launches comForte MR-Win6530,

instead of OutsideView, for startup TACL and event stream windows. The major difference is

that MR-Win6530 launches a single session per system load instead of four separate TACL

windows.

For information on installing and getting started with MR-Win6530, see the NonStop System

Console Installer Guide for version S7X-SWV2/HNSC-SWV2 (H06.11) or later. To launch a TACL

session directly from MR-Win6530, see the MR-Win6530 User's Guide (shipped with the

console-based product).