NonStop NS-Series Operations Guide (H06.12+)

Table C-1 Related Reading for Tools and Utilities (continued)
DescriptionDocumentationTool
This manual describes these disk and
tape utilities: BACKCOPY, BACKUP,
DCOM, DSAP, and RESTORE. This
manual supports both D-series,
G-series, and H-series RVUs.
Guardian Disk and Tape Utilities
Reference Manual
RESTORE
This manual describes the spooler
utilities—Peruse, SPOOLCOM, Font,
and RPSetup— and presents the
complete syntax for these utilities. It
also presents a general introduction to
the Spooler Plus subsystem.
Spooler Plus Utilities Reference ManualSPOOLCOM
This guide contains information
explaining how to perform routine
spooler operations. It provides
background information on spooler
components and tells you how to use
SPOOLCOM to monitor and manage
your system’s spooler operations. It
includes guidelines for identifying and
solving some common problems that
can occur with your spooler subsystem
and the printers associated with it.
Guardian User’s Guide
This guide describes how to automate
startup and shutdown procedures.
Integrity NonStop NS-Series Planning
Guide
Startup and shutdown command files
This manual describes the operation
of SCF on H-series RVUs and how it
is used to configure, control, and
monitor subsystems supported by an
SCF interface.
SCF Reference Manual for H-Series
RVUs
Subsystem Control Facility (SCF)
This manual describes the Kernel
subsystem, and the configuration and
management tasks you can perform
using the SCF interface to the Kernel
subsystem.
SCF Reference Manual for the Kernel
Subsystem
SCF interface to the Kernel subsystem
This manual describes how to use SCF
to configure, control, and monitor
storage devices.
SCF Reference Manual for the Storage
Subsystem
SCF interface to the storage
subsystem
This manual describes how to
configure, operate, and manage the
ServerNet LAN Systems Access (SLSA)
subsystem. This manual includes
detailed descriptions of the SCF
commands used with the SLSA
subsystem and a quick-reference
section showing SCF command syntax.
LAN Configuration and Management
Manual
SCF interface to the SLSA subsystem
This manual describes how to
configure a ServerNet wide area
network (SWAN) concentrator on an
Integrity NonStop server. It also
describes how to monitor, modify, and
control the WAN subsystem. It
includes detailed descriptions of the
SCF commands used with the WAN
subsystem.
WAN Subsystem Configuration and
Management Manual
SCF interface to the WAN subsystem
These documents describe how to use
the SCF interface to other subsystems.
Titles varySCF interface to other subsystems
203