NonStop NS-Series Operations Guide (H06.12+)

Table 3-4 Status LEDs and Their Functions (continued)
FunctionColorLED NameLocation
Lights to indicate internal
failure or service action
required.
AmberService
Lights when the adapter is
receiving power.
GreenPower-onGigabit Ethernet 4-port
ServerNet adapter (G4SA)
Lights to indicate internal
failure or service action
required.
AmberService
Lights when power is on
and adapter is available for
normal operation.
GreenPower-onLSU I/O PIC
Lights when a POST is in
progress, board is being
reset, or a fault exists.
AmberService
Lights when NonStop Blade
Element optic or ServerNet
link is functional.
GreenPower-onLSU optics adapter
connector
Lights when power is on
and adapter is available for
normal operation.
GreenPower-onLSU logic board
Lights when a POST is in
progress, board is being
reset, or a fault exists.
AmberService
Lights when power is on
and Blade Element is
available for normal
operation.
Flashing GreenPower-onNonStop Blade Element
Lights when Blade Element
is in low power mode.
Flashing Yellow
Lights when a hardware or
software fault exists.
Steady AmberService
Lights when the system
locator is activated.
Flashing BlueLocator
Lights when power is on
with PIC available for
normal operation.
GreenPower-onP-switch PICs
Lights when a fault exists.Amber
Lights when a ServerNet
link is functional.
GreenPower-onP-switch PIC ServerNet
connector
Related Reading
For more information about monitoring, see the documentation listed in Table 3-5.
Related Reading 67