NonStop NS-Series Planning Guide (H06.03+)

Introduction to Integrity NonStop NS-Series Systems
HP Integrity NonStop NS-Series Planning Guide—529567-004
1-14
Migration Considerations
This illustration shows the system load paths.
The command interpreter input (CIIN) file is automatically invoked after the first
processor is loaded. The CIIN file shipped with new systems contains the TACL
RELOAD * command, which loads the remaining processors.
For default configurations of the FCSAs, disk drive enclosures, and load disks, see
Example IOAM and Disk Drive Enclosure Configurations on page 4-24. For system
load procedures, see the NonStop NS-Series Hardware Installation Manual.
Migration Considerations
For information about migrating from NonStop S-series to Integrity NonStop NS-Series
systems, see Section 9, NonStop Migration Documentation and Considerations.
14 Mirror $SYSTEM-M 1 Y
15 Mirror backup $SYSTEM-M 1 X
16 Mirror backup $SYSTEM-M 1 Y
Load Path Description Source Disk
Destination
Processor
ServerNet Fabric
(page 2 of 2)
VST956.vsd
Processor
X
Y
Processor
X
Y
01
P-Switch
X Fabric
P-Switch
Y F a b ri c
IOAM Enclosure
Gro up 1 1 0
FCSAs
P
M
Disk Drive Enclosure
Disk Drive Enclosure
B
MB
1
2
1
2
1
2
1
2
ServerNet Switch Board
ServerNet Switch Board
1
2
2
1
X Fabric Y Fabric