NonStop NS-Series Planning Guide (H06.04+)
Table Of Contents
- What’s New in This Manual
- About This Manual
- 1 System Hardware Overview
- 2 Installation Facility Guidelines
- 3 System Installation Specifications
- 4 Integrity NonStop NSSeries System Description
- NonStop System Primer
- NonStop Advanced Architecture
- NonStop Blade Complex
- Processor Element
- Duplex Processor
- Triplex Processor
- Processor Synchronization and Rendezvous
- Memory Reintegration
- Failure Recovery for Duplex Processor
- Failure Recovery for Triplex Processor
- ServerNet Fabric I/O
- System Architecture
- Modular Hardware
- NonStop S-Series I/O Hardware
- System Models
- Default Startup Characteristics
- Migration Considerations
- System Installation Document Packet
- 5 Modular System Hardware
- Modular Hardware Components
- Cabinets
- AC Power PDUs
- Modular Cabinet PDU Keepout Panel
- NonStop Blade Element
- Logical Synchronization Unit (LSU)
- LSU Indicator LEDs
- Processor Switch
- P-Switch Indicator LEDs
- Processor Numbering
- I/O Adapter Module (IOAM) Enclosure and I/O Adapters
- Fibre Channel Disk Module
- Tape Drive and Interface Hardware
- Maintenance Switch (Ethernet)
- Optional UPS and ERM
- System Console
- Enterprise Storage System
- Component Location and Identification
- NonStop S-Series I/O Enclosures
- Modular Hardware Components
- 6 System Configuration Guidelines
- Enclosure Locations in Cabinets
- Internal ServerNet Interconnect Cabling
- Cable Labeling
- Cable Management System
- Internal Interconnect Cables
- Dedicated Service LAN Cables
- Cable Length Restrictions
- Internal Cable Part Numbers
- NonStop Blade Elements to LSUs
- NonStop Blade Element to NonStop Blade Element
- LSUs to Processor Switches and Processor IDs
- Processor Switch ServerNet Connections
- Processor Switches to IOAM Enclosures
- FCSA to Fibre Channel Disk Modules
- FCSA to Tape Devices
- P-Switch to NonStop S-Series I/O Enclosure Cabling
- IOAM Enclosure and Disk Storage Considerations
- Fibre Channel Devices
- G4SAs to Networks
- Default Naming Conventions
- PDU Strapping Configurations
- 7 Example Configurations
- A Cables
- B Control, Configuration, and Maintenance Tools
- Support and Service Library
- System Console
- Maintenance Architecture
- Dedicated Service LAN
- IP Addresses
- Ethernet Cables
- SWAN Concentrator Restriction
- System-Up Dedicated Service LAN
- Dedicated Service LAN Links With One IOAM Enclosure
- Dedicated Service LAN Links to Two IOAM Enclosures
- Dedicated Service LAN Links With IOAM Enclosure and NonStop SSeries I/O Enclosure
- Dedicated Service LAN Links With NonStop S-Series I/O Enclosure
- Initial Configuration for a Dedicated Service LAN
- Operating Configurations for Dedicated Service LANs
- OSM
- System-Down OSM Low-Level Link
- AC Power Monitoring
- AC Power-Fail States
- C Guide to Integrity NonStop NSSeries Server Manuals
- Safety and Compliance
- Index
System Installation Specifications
HP Integrity NonStop NS-Series Planning Guide—529567-005
3-2
North America and Japan: 208 V AC PDU Power
Cords
North America and Japan: 208 V AC PDU Power Cords
•
Three-phase delta, four-wire with insulated ground conductor, 60A (or optional
30A) RMS
•
AC power cord (two supplied per modular cabinet): length 7 feet (183 centimeters)
•
60A AC power cable plug (one per power cord): four-wire, three-phase
°
HP Product ID: M8950-4
°
HP part number: 527993
°
Manufacturer: Hubbell
°
HP supplied plug manufacturer number: HBL460P9W
°
Required customer-supplied receptacle manufacturer number: HBL460C9W or
equivalent receptacle
•
30A AC power cable plug (one per power cord): four-wire, three-phase
°
HP Product ID: not available
°
HP part number: 5541088
°
Manufacturer: Hubbell
°
HP supplied plug manufacturer number: HBL2721
°
Required customer-supplied receptacle manufacturer number: HBL2720 (wall
mount recepticle), HBL2723 (connector body for cable), or equivalent
receptacle
Europe, Middle East, and Africa: 230/400 V AC PDU Power Cords
•
Three-phase wye, five-wire with insulated ground conductor, 63A (or optional 30A)
RMS
•
AC power cord (two supplied per modular cabinet): length 7 feet (183 centimeters)
•
60A AC power cable plug (one per power cord): five-wire, three-phase, 63A
°
HP Product ID: M8950-5
°
HP part number: 527995
°
Manufacturer: Hubbell
°
HP supplied plug manufacturer number: HBL563P6W
°
Required customer-supplied receptacle manufacturer number: HBL563C6W or
equivalent receptacle
•
30A harmonized AC power cable plug (one per power cord): five-wire, three-
phase, 63A
°
HP Product ID: not available
°
HP part number: 429678
°
Manufacturer: Hubbell
°
HP supplied plug manufacturer number: HBL532P6W
°
Required customer-supplied receptacle manufacturer number: HBL532R6W
(wall mount recepticle), HBL532C6W (connector body for cable), or equivalent
receptacle
•
30A nonharmonized AC power cable plug (one per power cord): five-wire, three-
phase, 63A
°
HP Product ID: not available
°
HP part number: 541089
°
Manufacturer: Hubbell