NonStop NS-Series Planning Guide (H06.04+)

Integrity NonStop NS-Series System Description
HP Integrity NonStop NS-Series Planning Guide—529567-005
4-23
System Installation Document Packet
°
Disconnect the NonStop S-series I/O enclosure from the NonStop S-series
system and connect it to the Integrity NonStop NS-series system.
°
Change the mirror on the Integrity NonStop NS-series system to be the primary
disk.
°
Revive that primary disk with a mirror so that the Integrity NonStop NS-series
system contains both the primary and the mirror
System Installation Document Packet
To keep track of the hardware configuration, internal and external communications
cabling, IP addresses, and connect networks, assemble and retain as the systems
records an Installation Document Packet. This packet can include:
Factory-Installed Hardware Configuration Tech Memo
Each new Integrity NonStop NS-series system includes a document that describes:
•
Each cabinet included with the system
•
Each hardware enclosure installed in the cabinet
•
Cabinet U location of the bottom edge of each enclosure
•
Each ServerNet cable with:
°
Source and destination enclosure, component, and connector
°
Cable part number
°
Source and destination connection labels
This document is called a tech memo and serves as the physical location and
connection map for the system. An example tech memo that describes a duplex
system is on the next two pages.
Topic Page
Factory-Installed Hardware Configuration Tech Memo
4-23
ServerNet Adapter Configuration Forms 4-25
ServerNet Cluster Configuration Form 4-25