NonStop NS-Series Planning Guide (H06.04+)
Table Of Contents
- What’s New in This Manual
- About This Manual
- 1 System Hardware Overview
- 2 Installation Facility Guidelines
- 3 System Installation Specifications
- 4 Integrity NonStop NSSeries System Description
- NonStop System Primer
- NonStop Advanced Architecture
- NonStop Blade Complex
- Processor Element
- Duplex Processor
- Triplex Processor
- Processor Synchronization and Rendezvous
- Memory Reintegration
- Failure Recovery for Duplex Processor
- Failure Recovery for Triplex Processor
- ServerNet Fabric I/O
- System Architecture
- Modular Hardware
- NonStop S-Series I/O Hardware
- System Models
- Default Startup Characteristics
- Migration Considerations
- System Installation Document Packet
- 5 Modular System Hardware
- Modular Hardware Components
- Cabinets
- AC Power PDUs
- Modular Cabinet PDU Keepout Panel
- NonStop Blade Element
- Logical Synchronization Unit (LSU)
- LSU Indicator LEDs
- Processor Switch
- P-Switch Indicator LEDs
- Processor Numbering
- I/O Adapter Module (IOAM) Enclosure and I/O Adapters
- Fibre Channel Disk Module
- Tape Drive and Interface Hardware
- Maintenance Switch (Ethernet)
- Optional UPS and ERM
- System Console
- Enterprise Storage System
- Component Location and Identification
- NonStop S-Series I/O Enclosures
- Modular Hardware Components
- 6 System Configuration Guidelines
- Enclosure Locations in Cabinets
- Internal ServerNet Interconnect Cabling
- Cable Labeling
- Cable Management System
- Internal Interconnect Cables
- Dedicated Service LAN Cables
- Cable Length Restrictions
- Internal Cable Part Numbers
- NonStop Blade Elements to LSUs
- NonStop Blade Element to NonStop Blade Element
- LSUs to Processor Switches and Processor IDs
- Processor Switch ServerNet Connections
- Processor Switches to IOAM Enclosures
- FCSA to Fibre Channel Disk Modules
- FCSA to Tape Devices
- P-Switch to NonStop S-Series I/O Enclosure Cabling
- IOAM Enclosure and Disk Storage Considerations
- Fibre Channel Devices
- G4SAs to Networks
- Default Naming Conventions
- PDU Strapping Configurations
- 7 Example Configurations
- A Cables
- B Control, Configuration, and Maintenance Tools
- Support and Service Library
- System Console
- Maintenance Architecture
- Dedicated Service LAN
- IP Addresses
- Ethernet Cables
- SWAN Concentrator Restriction
- System-Up Dedicated Service LAN
- Dedicated Service LAN Links With One IOAM Enclosure
- Dedicated Service LAN Links to Two IOAM Enclosures
- Dedicated Service LAN Links With IOAM Enclosure and NonStop SSeries I/O Enclosure
- Dedicated Service LAN Links With NonStop S-Series I/O Enclosure
- Initial Configuration for a Dedicated Service LAN
- Operating Configurations for Dedicated Service LANs
- OSM
- System-Down OSM Low-Level Link
- AC Power Monitoring
- AC Power-Fail States
- C Guide to Integrity NonStop NSSeries Server Manuals
- Safety and Compliance
- Index
Contents
HP Integrity NonStop NS-Series Planning Guide—529567-005
iv
6. System Configuration Guidelines
Optional UPS and ERM 5-21
System Console 5-22
Enterprise Storage System 5-23
Component Location and Identification 5-24
Terminology 5-24
Rack and Offset Physical Location 5-25
NonStop Blade Element Group-Module-Slot Numbering 5-26
LSU Group-Module-Slot Numbering 5-27
Processor Switch Group-Module-Slot Numbering 5-28
IOAM Enclosure Group-Module-Slot Numbering 5-29
Fibre Channel Disk Module Group-Module-Slot Numbering 5-30
NonStop S-Series I/O Enclosures 5-31
IOMF 2 CRU 5-32
NonStop S-Series Disk Drives and ServerNet Adapters 5-32
NonStop S-Series I/O Enclosure Group Numbers 5-32
6. System Configuration Guidelines
Enclosure Locations in Cabinets 6-2
Internal ServerNet Interconnect Cabling 6-3
Cable Labeling 6-3
Cable Management System 6-5
Internal Interconnect Cables 6-5
Dedicated Service LAN Cables 6-6
Cable Length Restrictions 6-6
Internal Cable Part Numbers 6-7
NonStop Blade Elements to LSUs 6-7
NonStop Blade Element to NonStop Blade Element 6-7
LSUs to Processor Switches and Processor IDs 6-7
Processor Switch ServerNet Connections 6-12
Processor Switches to IOAM Enclosures 6-13
FCSA to Fibre Channel Disk Modules 6-14
FCSA to Tape Devices 6-14
P-Switch to NonStop S-Series I/O Enclosure Cabling 6-15
IOAM Enclosure and Disk Storage Considerations 6-18
Fibre Channel Devices 6-18
Factory-Default Disk Volume Locations 6-20
Fibre Channel Device Configurations 6-20
Fibre Channel Device Configuration Restrictions 6-21
Fibre Channel Device Configuration Recommendations 6-21