NonStop NS-Series Planning Guide (H06.05+)

System Configuration Guidelines
HP Integrity NonStop NS-Series Planning Guide—529567-008
6-36
Default Naming Conventions
This illustration show a conceptual example for copper and fiber-optic connectivity to
the various LANs:
Default Naming Conventions
With a few exceptions, default naming conventions are not necessary for the modular
resources that make up Integrity NonStop NS-series systems. In most cases, users
can name their resources at will and use the appropriate management applications and
tools to find the location of the resource.
However, default naming conventions for certain resources simplify creation of the
initial configuration files and automatic generation of the names of the modular
resources. When autoconfigure mode is set to ON for storage subsystems, the
preconfigured default naming convention is used to generate the names of the Fibre
Channel disk drives. Preconfigured default resource names are:
Type of Object Naming Convention Example Description
Fiber Channel
disk drive
$FC number $FC10 Tenth Fibre Channel disk
drive in the system
ESS disk drive $ESS number $ESS20 Twentieth ESS disk drive in
the system
Modular tape
drive
$TAPE number $TAPE01 First modular tape drive in
the system
G4SA G group module slot G11123 G4SA in location 111.2.3
G4SA LIF L group module slot
port
L11123B LIF for PIF at location
111.2.3.0.B
VST075.vsd
IOAM Enclosure
G4SA
Operations LAN
To Maintenance Switch
(10/100 Mbps copper) and
then to Operations LAN
To Maintenance Switch
(10/100 Mbps copper) and
then to Operations LAN
To Application LAN
(10/100/1000 Mbps
copper)
To Application LAN
(10/100/1000 Mbps
copper)
To Application LAN
(10/100/1000 Mbps Fiber)
To Application LAN
(10/100/1000 Mbps Fiber)