NonStop NS-Series Planning Guide (H06.05+)

Example Configurations

HP Integrity NonStop NS-Series Planning Guide—529567-008

7-10

Example 4-Processor Duplex System Cabling

This illustration shows an example 4-processor duplex system in a single cabinet. This

simplified, conceptual representation shows the X and Y ServerNet cabling between

the NonStop Blade Element, LSU, p-switch, and IOAM enclosures. For clarity, power

and Ethernet cables are not shown. For cable-by-cable interconnect diagrams, see

Internal ServerNet Interconnect Cabling on page 6-4.

Cable management hardware that is part of each modular enclosure and also the

modular cabinet is not shown. Therefore, actual cable routing using the cable

management hardware is different from that shown. For detailed information on cable

routing, refer to the NonStop NS-Series Hardware Installation Manual.

This illustration also shows an example of the modular I/O hardware with simplified

representation of the X and Y ServerNet cabling between the IOAM enclosures and the

p-switches and the simplified cabling between the FCSAs and Fibre Channel disk

modules. The example Fibre Channel disk module configuration for the group 110

VST.703.vsd

FCDM

IOAM

110.3

IOAM

110.2

NSBE 1A

NSBE 1B

LSU

P-Switch