NonStop NS-Series Planning Guide (H06.05+)

Integrity NonStop NS14000 System Description
HP Integrity NonStop NS-Series Planning Guide—529567-008
8-13
Migrating NonStop S-Series Systems
This illustration shows the system load paths.
The command interpreter input file (CIIN) is automatically invoked after the first
processor is loaded. The CIIN file shipped with new systems contains the TACL
RELOAD * command, which loads the remaining processors.
For default configurations of the FCSAs, Fibre Channel disk modules, and load disks,
see Example Configurations of the IOAM Enclosure and Fibre Channel Disk Module on
page 6-26. For system load procedures, see the NonStop NS-Series Hardware
Installation Manual.
Migrating NonStop S-Series Systems
The Integrity NonStop NS14000 system does not support migrating from NonStop
S-series systems to Integrity NonStop NS14000 systems.
13 Mirror $SYSTEM-M 1 X
14 Mirror $SYSTEM-M 1 Y
15 Mirror backup $SYSTEM-M 1 X
16 Mirror backup $SYSTEM-M 1 Y
Load Path Description Source Disk
Destination
Processor
ServerNet Fabric
(page 2 of 2)
IOAM Enclosure
Group 100
FCSAs
MB
P
Fibre Channel Disk Module
M
B
1
2
1
2
1
2
1
2
ServerNet Switch Board
ServerNet Switch Board
1
2
2
1
X Fabric Y Fabric
Fibre Channel Disk Module
Processor 0
XY
Processor 1
XY
VST818.vsd