NonStop NS-Series Planning Guide (H06.05+)

Integrity NonStop NS14000 System Description
HP Integrity NonStop NS-Series Planning Guide—529567-008
8-16
System Configuration Guidelines
System Configuration Guidelines
The system configuration guidelines for the Integrity NonStop NS14000 system are
similar to those for the Integrity NonStop NS16000 system. For general information on
this topic, see Section 6, System Configuration Guidelines. For example
configurations, see Section 7, Example Configurations. These topics confirm
similarities and describe any differences in the configuration of the Integrity NonStop
NS14000 system compared to the Integrity NonStop NS16000 system.
Enclosure Locations in Cabinets
The Integrity NonStop NS14000 system uses the same enclosure or component
location within a cabinet as the Integrity NonStop NS16000 system with the exception
that Integrity NonStop NS14000 systems do not use p-switches. LSUs in a NonStop
Blade Complex connect directly to 4PSEs installed in the IOAM enclosure. For
information on this topic, see Enclosure Locations in Cabinets on page 6-2.
Internal ServerNet Interconnect Cabling
This subsection describes internal ServerNet interconnect cabling and covers these
topics:
Topic Page
Enclosure Locations in Cabinets
8-16
Internal ServerNet Interconnect Cabling 8-16
P-Switch to NonStop S-Series I/O Enclosure
Cabling
8-22
IOAM Enclosure and Disk Storage
Considerations
8-22
Fibre Channel Devices 8-23
G4SAs to Networks 8-24
Default Naming Conventions 8-24
PDU Strapping Configurations 8-24
Topic Page (page 1 of 2)
Cable Labeling
8-17
Cable Management System 8-17
Internal Interconnect Cables 8-17
Dedicated Service LAN Cables 8-17
Cable Length Restrictions 8-18
Internal Cable Part Numbers 8-18
NonStop Blade Elements to LSUs 8-18
NonStop Blade Element to NonStop Blade Element 8-18