NonStop NS-Series Planning Guide (H06.05+)

Integrity NonStop NS14000 System Description
HP Integrity NonStop NS-Series Planning Guide—529567-008
8-19
Internal ServerNet Interconnect Cabling
2.2, 3.1, and 3.2. Therefore, fiber-optic cable connections from the LSUs to the 4PSEs
in the IOAM enclosure determine the number of each NonStop Blade Complex.
This table lists the default 4PSE slot and port coupling to the processor number:
The two cabling diagrams on the next pages illustrate the default configuration and
connections for a triplex system processor. These diagrams are not for use in installing
or cabling the system. For instructions on connecting the cables, see the NonStop
NS-Series Hardware Installation Manual.
Note. Only 4PSEs are supported for installation in slots 2.1, 2.2, 3.1, and 3.2 of the IOAM
enclosure for an Integrity NonStop NS14000 server.
Module.Slot Port Fabric Processor Number
2.1 1 X 0
2X1
3X2
4X3
2.2 1 X 4
2X5
3X6
4X7
3.1 1 Y 0
2Y1
3Y2
4Y3
3.2 1 Y 4
2Y5
3Y6
4Y7