NonStop NS-Series Planning Guide (H06.05+)

HP Integrity NonStop NS-Series Planning Guide—529567-008
3-1
3
System Installation Specifications
This section provides these specifications necessary for planning the system
installation site:
Processor Type and Memory Size
The processor type is specified in the CONFTEXT configuration file before the system
is shipped from the factory.
Verify the Processor Type
The SYSTEM_PROCESSOR_TYPE for an Integrity NonStop NS-series system can be
verified in the CONFTEXT configuration file:
Note. For system installation specifications specific to the Integrity NonStop NS14000 system,
see Section 8, Integrity NonStop NS14000 System Description.
Topic Page
Processor Type and Memory Size 3-1
AC Input Power for Modular Cabinets 3-2
Dimensions and Weights 3-11
Environmental Specifications 3-11
Calculating Specifications for Enclosure Combinations 3-13
Note. All specifications provided in this section assume that each enclosure in the modular
cabinet is fully populated; for example, a NonStop Blade Element with four processors and
maximum memory. The maximum current for each AC service depends on the number and
type of enclosures installed in the modular cabinet. Power, weight, and heat loads are less
when enclosures are not fully populated; for example, a NonStop Blade Element with fewer
processors or a Fibre Channel disk module with fewer disks.
Integrity
NonStop
Server
Memory
Size
Processor
Type Full Name of Processor Type
NS16000
and
NS14000
16 GB
or
32 GB
NSE-A is specified
in the CONFTEXT
configuration file.
NonStop System Enterprise Model A processor
ALLPROCESSORS:
SYSTEM_PROCESSOR_TYPE NSE-A