NonStop NS-Series Planning Guide (H06.05+)

Contents
HP Integrity NonStop NS-Series Planning Guide—529567-008
iv
5. Modular System Hardware (continued)
5. Modular System Hardware (continued)
Processor Numbering 5-19
I/O Adapter Module (IOAM) Enclosure and I/O Adapters 5-20
Fibre Channel Disk Module 5-25
Tape Drive and Interface Hardware 5-25
Maintenance Switch (Ethernet) 5-26
UPS and ERM (Optional) 5-27
System Console 5-28
Enterprise Storage System 5-28
Component Location and Identification 5-29
Terminology 5-30
Rack and Offset Physical Location 5-31
NonStop Blade Element Group-Module-Slot Numbering 5-32
LSU Group-Module-Slot Numbering 5-33
Processor Switch Group-Module-Slot Numbering 5-34
Fibre Channel Disk Module Group-Module-Slot Numbering 5-36
NonStop S-Series I/O Enclosures 5-37
IOMF 2 CRU 5-39
NonStop S-Series Disk Drives and ServerNet Adapters 5-39
NonStop S-Series I/O Enclosure Group Numbers 5-39
6. System Configuration Guidelines
Enclosure Locations in Cabinets 6-2
Internal ServerNet Interconnect Cabling 6-4
Cable Labeling 6-4
Cable Management System 6-5
Internal Interconnect Cables 6-6
Dedicated Service LAN Cables 6-7
Cable Length Restrictions 6-7
Internal Cable Product IDs 6-8
NonStop Blade Elements to LSUs 6-8
NonStop Blade Element to NonStop Blade Element 6-8
LSUs to Processor Switches and Processor IDs 6-8
Processor Switch ServerNet Connections 6-14
Processor Switches to IOAM Enclosures 6-14
FCSA to Fibre Channel Disk Modules 6-16
FCSA to Tape Devices 6-16