NonStop NS-Series Servers Site Preparation (H06.03+)

Specifications for Integrity NonStop NS-Series
Servers
HP Integrity NonStop NS-Series Site Preparation Guide—527836-005
3-3
Europe, Middle East, and Africa: 230/400 V AC PDU
Power Cords
Europe, Middle East, and Africa: 230/400 V AC PDU Power Cords
•
Three-phase wye, five-wire with insulated ground conductor, 63A RMS
•
AC power cord (two supplied per modular cabinet): length 7 feet (183 centimeters)
•
AC power cable plug (one per power cord): five-wire, three-phase, 63A
°
HP Product ID: M8950-5
°
HP part number: 527995
°
Manufacturer: Hubbell
°
HP supplied plug manufacturer number: HBL563P6W
°
Required customer-supplied receptacle manufacturer number: HBL563C6W or
equivalent receptacle
International: 200 to 250 V AC PDU Power Cords
•
Single-phase, three-wire with insulated ground conductor, 63A RMS
•
AC power cord (two supplied per modular cabinet): length 7 feet (183 centimeters)
•
AC power cable plug (one per power cord): three-wire, single-phase, 63A
°
HP Product ID: M8950-3
°
HP part number: 527994
°
Manufacturer: Hubbell
°
HP supplied plug manufacturer number: HBL363P6W
°
Required customer-supplied receptacle manufacturer number: HBL363C6W or
equivalent receptacle
Grounding
A safety ground/protective earth conductor is required for each AC service entrance to
the NonStop server equipment. This ground must comply with local codes and any
other applicable regulations
Ground
VST052.vsd
Ground
VST050.vsd