NonStop NS1000 Planning Guide (H06.05+)

Control, Configuration, and Maintenance Tools
HP Integrity NonStop NS1000 Planning Guide—542527-004
B-3
System Console Configurations
One System Console Managing One System (Setup
Configuration)
The one system console on the LAN must be configured as the primary system
console. This configuration can be called the
setup configuration and is used during
initial setup and installation of the system console and the server.
The setup configuration is an example of a secure, stand-alone network. A LAN cable
connects the primary system console to the maintenance switch, and additional LAN
cables connect the ServerNet switch boards in the IOAM enclosures and G4SA ports.
The maintenance switch or an optional second maintenance switch allows you to later
VST073.vsd
Maintenance
Switch 1
Secure
Operations LAN
IOAM Enclosure
10/100 ENET
Port, ServerNet
Switch Boards
Remote
Service
Provider
DHCP
DNS
server
(optional)
G4SA FCSA G4SA FCSA 4PSE FCSA FCSA
Optional
Connection to
a Secure
Operations
LAN
(One or Two
Connections)
Modem
Primary System Console
4PSE 4PSE 4PSE