NonStop NS1000 Planning Guide (H06.05+)
Control, Configuration, and Maintenance Tools
HP Integrity NonStop NS1000 Planning Guide—542527-004
B-8
Dedicated Service LAN
•
Connect one G4SA to each maintenance switch.
This illustration shows a fault-tolerant LAN configuration with two maintenance
switches:
Caution. To avoid possible conflicts on the LAN:
•
If the configuration includes two maintenance switches, install and configure one switch
completely, including assigning its IP address, before you install the other.
•
Only one connection between the maintenance switches is permitted. More than one
connection overloads network traffic, rendering the dedicated service LAN unusable.
•
If ServerNet switch boards in the IOAM enclosure will have static IP addresses, configure
one completely, including assigning the IP address, before you configure the other.
Connections to Switch 1
Connections to Switch 2
VST175.vsd
Maintenance
Switch 1
Secure
Operations LAN
IOAM Enclosure
Maintenance
Switch 2
10/100 ENET
Port, ServerNet
Switch Boards
Remote
Service
Provider
DHCP
DNS
server
(optional)
G4SA
(Y Fabric)
Group 3,
Slot 5, Port A
G4SA
(X Fabric)
Group 2,
Slot 5, Port A
G4SA
FCSA
G4SA
FCSA
4PSE
FCSA
FCSA
Optional
Connection to
a Secure
Operations
LAN
(One or Two
Connections)
Modem
Backup System Console
Remote
Service
Provider
Modem
Primary System Console
4PSE
4PSE
4PSE