NonStop NS1000 Planning Guide (H06.05+)

Control, Configuration, and Maintenance Tools
HP Integrity NonStop NS1000 Planning Guide—542527-004
B-12
Dedicated Service LAN Links With One IOAM
Enclosure
dedicated service LAN, use the slower 10/100 Mbps PIF A rather than one of the high-
speed 1000 Mbps Ethernet ports of PIF C or D.
Dedicated Service LAN Links With One IOAM Enclosure
This illustration shows the dedicated service LAN cables connected to the G4SAs in
slot 5 of both modules of an IOAM enclosure and to the maintenance switch:
The values in this table show the identification for the G4SAs in the preceding
illustration:
Initial Configuration for a Dedicated Service LAN
New systems are shipped with an initial set of IP addresses configured. For a listing of
these initial IP addresses, see IP Addresses
on page B-9.
Factory-default IP addresses for the G4SA are in the
LAN Configuration and
Management Manual.
IP addresses for SWAN concentrators are in the WAN
Subsystem Configuration and Management Manual
.
GMS for G4SA
Location in IOAM
Enclosure G4SA PIF G4SA PIF
TCP/IP
Stack IP Configuration
100.2.5 G10025.0.A L1002R $ZTCP0 IP: 192.231.36.10
GW: 192.231.36.9
Subnet:
%hFFFFFF00
Hostname: osmlanx
100.3.5 G10035.0.A L1003R $ZTCP1 IP: 192.231.36.11
GW: 192.231.36.9
Subnet:
%hFFFFFF00
Hostname: osmlany
VST340.vsd
Module 2
Module 3
Maintenance Switch
IOAM
Enclosure
(Group
110)
G4SA Ethernet
PIF Connectors
Cable to
Maintenance
Switch
B
A
C
D