NonStop NS1000 Planning Guide (H06.05+)

System Installation Specifications

HP Integrity NonStop NS1000 Planning Guide—542527-004

3-2

Modular Cabinet AC Input Power

An AC power cable is factory-connected to each of two PDUs inside the modular

cabinet. When you order the system, you specify the location of the factory-installed

PDU junction boxes (at the top or bottom of the modular cabinet), depending on what

the site provides for power feed:

•

Top feed: For power cables routed to the top of the modular cabinet (such as from

overhead cable trays)

•

Bottom feed: For power cables routed to the bottom of the modular cabinet (such

as from under raised flooring)

For information on the modular cabinets, refer to Modular Cabinets on page 5-3. For

information on the PDUs, refer to Power Distribution Unit (PDU) on page 5-5.

North America and Japan: 208 V AC PDU Power Cords

For information about power cords for a 208 V AC input, 3-phase delta, 24A RMS

modular cabinet, refer to North America and Japan 208 V AC input, 3-phase delta, 24A

RMS Modular Cabinet on page 5-3.

North America and Japan: 200 to 240 V AC PDU Power Cords

For information about power cords for a 200 to 240 V AC input, single phase, 40A

RMS modular cabinet, refer to North America and Japan 200 to 240 V AC input, Single

phase, 40A RMS Modular Cabinet on page 5-3.

International: 380 to 415 V AC PDU Power Cords

For information about power cords for a 380 to 415 V AC input, 3-phase Wye, 16A

RMS modular cabinet, refer to International 380 to 415 V AC input, 3-phase Wye, 16A

RMS Modular Cabinet on page 5-4.

Topic Page

North America and Japan: 208 V AC PDU Power Cords

3-2

North America and Japan: 200 to 240 V AC PDU Power Cords 3-2

International: 380 to 415 V AC PDU Power Cords 3-2

International: 200 to 240 V AC PDU Power Cords 3-3

Grounding 3-3

Branch Circuits and Circuit Breakers 3-3

Enclosure AC Input 3-4

Enclosure Power Loads 3-4