NonStop NS1000 Planning Guide (H06.05+)

Integrity NonStop NS1000 System Description
HP Integrity NonStop NS1000 Planning Guide—542527-004
4-10
Changing the CONFTEXT File
Each Integrity NonStop NS1000 system ships with these default startup characteristics:
•
$SYSTEM disks residing in a Fibre Channel disk module connected to IOAM
enclosure group 100 with the disks in these locations:
•
Configured system load paths
•
Enabled command interpreter input (CIIN) function
If the automatic system load is not successful, additional paths for loading are available
in the boot task. Using one load path, the system load task attempts to use another
path and keeps trying until all possible paths have been used or the system load is
successful. These 16 paths are available for loading, in order of their use:
IOAM FCSA Fibre Channel Disk Module
Path Group Module Slot SAC Shelf Bay
Primary 100 2 3 1 1 1
Backup 100 3 3 1 1 1
Mirror 100 3 3 2 1 1
Backup 100 2 3 2 1 1
Load Path Description Source Disk
Destination
Processor
ServerNet Fabric
1 Primary $SYSTEM-P 0 X
2 Primary $SYSTEM-P 0 Y
3 Backup $SYSTEM-P 0 X
4 Backup $SYSTEM-P 0 Y
5 Mirror $SYSTEM-M 0 X
6 Mirror $SYSTEM-M 0 Y
7 Mirror backup $SYSTEM-M 0 X
8 Mirror backup $SYSTEM-M 0 Y
9 Primary $SYSTEM-P 1 X
10 Primary $SYSTEM-P 1 Y
11 Backup $SYSTEM-P 1 X
12 Backup $SYSTEM-P 1 Y
13 Mirror $SYSTEM-M 1 X
14 Mirror $SYSTEM-M 1 Y
15 Mirror backup $SYSTEM-M 1 X
16 Mirror backup $SYSTEM-M 1 Y