NonStop NS1000 Planning Guide (H06.05+)

Integrity NonStop NS1000 System Description
HP Integrity NonStop NS1000 Planning Guide—542527-004
4-11
System Installation Document Packet
This illustration shows the system load paths:
The command interpreter input file (CIIN) is automatically invoked after the first
processor is loaded. The CIIN file shipped with new systems contains the TACL
RELOAD * command, which loads the remaining processors.
For default configurations of the FCSAs, Fibre Channel disk modules, and load disks,
see Example Configurations of the IOAM Enclosure and Fibre Channel Disk Module on
page 6-14. For system load procedures, see the NonStop NS-Series Hardware
Installation Manual.
System Installation Document Packet
To keep track of the hardware configuration, internal and external communications
cabling, IP addresses, and connect networks, assemble and retain as the systems
records an Installation Document Packet. This packet can include:
Topic Page
Tech Memo for the Factory-Installed Hardware Configuration
4-12
Configuration Forms for the ServerNet Adapter 4-12
IOAM Enclosure
Group 100
FCSA
residing in slot
3 of module 2
P
M
Fibre Channel Disk Module
B
MB
1
2
1
2
1
2
1
2
ServerNet Switch Board
ServerNet Switch Board
1
2
2
1
X Fabric Y Fabric
Fibre Channel Disk Module
XY XY
VST818.vsd
Processor 0
(Blade element 1)
Processor 1
(Blade element 2)
FCSA
residing in slot
3 of module 3