NonStop NS1000 Planning Guide (H06.05+)

HP Integrity NonStop NS1000 Planning Guide—542527-004
5-1
5 Modular System Hardware
This section describes the hardware used in the Integrity NonStop NS1000 system:
Modular Hardware Components
These hardware components can be part of an Integrity NonStop NS1000 system:
The Integrity NonStop NS1000 server uses many of the same modular hardware
components as other Integrity NonStop NS-series servers. For general descriptions of
the components, refer to the NonStop NS-Series Planning Guide. Details about the use
or implementation of a hardware component that is specific to an Integrity NonStop
NS1000 server are presented here.
All Integrity NonStop NS1000 server components are field-replaceable units (FRUs)
that can only be serviced by service providers trained by HP.
For information about installing the Integrity NonStop NS1000 server hardware, refer to
the NonStop NS1000 Hardware Installation Manual.
Several combinations of hardware component enclosures are possible within a
modular cabinet for an Integrity NonStop NS1000 system. The applications and
purpose of any Integrity NonStop NS1000 system determine the number and
combination of hardware component enclosures within a cabinet.
Topic Page
Modular Hardware Components
5-1
Component Location and Identification 5-11
Topic Page
Modular Cabinets
5-3
Power Distribution Unit (PDU) 5-5
Blade Element 5-5
I/O Adapter Module (IOAM) Enclosure and I/O Adapters 5-8
Fibre Channel Disk Module 5-9
Tape Drive and Interface Hardware 5-9
Maintenance Switch (Ethernet) 5-9
System Console 5-10
Enterprise Storage System 5-10