NonStop NS1000 Planning Guide (H06.05+)

Modular System Hardware
HP Integrity NonStop NS1000 Planning Guide—542527-004
5-3
Modular Cabinets
Modular Cabinets
The modular cabinet is a 19-inch, 42 U high, rack for mounting modular components.
The modular cabinet comes equipped with front and rear doors. To mount a Power
Distribution Unit (PDU) without occupying any U-space in the cabinet, the cabinet
includes an extension, which makes it deeper than some industry-standard racks.
Depending on your power requirements, these modular cabinets are supported for
installing the components of an Integrity NonStop NS1000 server:
North America and Japan 208 V AC input, 3-phase delta, 24A
RMS Modular Cabinet
•
EIA standard 19-inch rack with 42U of rack space
•
Geography: North America and Japan
•
Recommended for most configurations
•
Includes 2 power distribution units (PDU)
°
Zero-U rack design
•
PDU input characteristics
°
208 V ac, 3-phase delta, 24A RMS, 4-wire
°
50/60Hz
°
NEMA L15-30 input plug
°
6.5 feet (2 m) attached power cord
•
PDU output characteristics
°
3 circuit-breaker-protected 13.86A load segments
°
36 AC receptacles per PDU (12 per segment) - IEC 320 C13 10A receptacle
type
°
3 AC receptacles per PDU (1 per segment) - IEC 320 C19 12A receptacle type
•
Includes front and rear doors
North America and Japan 200 to 240 V AC input, Single
phase, 40A RMS Modular Cabinet
•
EIA standard 19-inch rack with 42U of rack space
•
Geography: North American and Japan
•
Recommended for most configurations
•
Includes 2 power distribution units (PDU)
Note. For current cabinet installation and configuration information, contact your HP product
representative .
Modular Cabinet Page
North America and Japan 208 V AC input, 3-phase delta, 24A RMS Modular Cabinet
5-3
North America and Japan 200 to 240 V AC input, Single phase, 40A RMS Modular
Cabinet
5-3
International 380 to 415 V AC input, 3-phase Wye, 16A RMS Modular Cabinet 5-4
International 200 to 240 V AC input, Single phase, 32A RMS Modular Cabinet 5-4