NonStop NS1000 Planning Guide (H06.05+)

Modular System Hardware
HP Integrity NonStop NS1000 Planning Guide—542527-004
5-8
I/O Adapter Module (IOAM) Enclosure and I/O
Adapters
This table describes front panel button and indicator LEDs for the preceding illustration:
For information about installing the Integrity NonStop NS1000 server hardware, refer to
the NonStop NS1000 Hardware Installation Manual.
For additional information about the HP Integrity rx2620 server, refer to the HP
Cybrary: rx2620 home page:
http://cybrary.inet.cpqcorp.net/HW/SYS/INTEL/SERVER/SERVER_RX262
0/index.html
I/O Adapter Module (IOAM) Enclosure and I/O Adapters
The IOAM enclosure provides the Integrity NonStop NS1000 server with its system I/O.
For a general description of the IOAM enclosure and I/O adapters, refer to the
NonStop NS-Series Planning Guide. Details about the use or implementation of the
IOAM enclosure and I/O adapters that are specific to an Integrity NonStop NS1000
server are presented here:
•
Only one IOAM enclosure is supported in an Integrity NonStop NS1000 server.
•
The group number for the IOAM enclosure is 100 in an Integrity NonStop NS1000
system.
Front
Panel
Illustration
Reference
Number
LED
Indicator State Meaning
1 e-buzzer
icon
On
Off
Indicates the position of the internal speaker
2 Locator
LED and
button
On
Off
Identifies the rack position of the system
3 Diagnostic
LEDs
On
Off
Identifies system errors
4LAN LEDOn
Off
Indicates the system is communicating over the LAN
5System
LED
On
Flashing
Off
Identifies system errors
6Power
button
Turns the system power on and off
7Power
LED
On
Off
Indicates power is on; blade element is available for
normal operation.
Indicates power is off.