NonStop NS1000 Planning Guide (H06.05+)

System Configuration Guidelines
HP Integrity NonStop NS1000 Planning Guide—542527-004
6-8
Blade Elements to IOAM Enclosure
This cabling diagram illustrates the default configuration and connections for an
8-processor NonStop NS1000 Hardware Installation Manualprocessor Integrity
NonStop NS1000 system. Four 4PSEs are required: two for the X-fabric and two for
the Y-fabric The diagram is not for use in installing or cabling the system. For
instructions on connecting the cables, see the
NonStop NS-Series Hardware
Installation Manual.
VST018.vsd
IOAM
Enclosure
Processor 7
(Blade element 8)
Processor 6
(Blade element 7)
Module 3 Y-Fabric
FCSA G4SA FCSA 4PSE 4PSE FCSA 4PSE FCSA
Module 2 X-Fabric
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
G4SA G4SA FCSA
FCSA
FCSA FCSA
4PSE
4PSE
4PSE 4PSE
Processor 5
(Blade element 6)
Processor 4
(Blade element 5)
Processor 3
(Blade element 4)
Processor 2
(Blade element 3)
Port Y
Port X
Slot 2
Processor 1
(Blade element 2)
Processor 0
(Blade element 1)
X Fabric
Y Fabric
Slots
1
2
34 51
2
34 5