NonStop NS1000 Planning Guide (H06.05+)

System Configuration Guidelines
HP Integrity NonStop NS1000 Planning Guide—542527-004
6-10
Fibre Channel Devices
Fibre Channel Devices
This subsection describes Fibre Channel devices and covers these topics:
The only Fibre Channel device used internally with the Integrity NonStop NS1000
system is the Fibre Channel disk module (FCDM). An FCDM and its disk drives are
controlled through the Fibre Channel ServerNet adapter (FCSA). For more information
on the FCSA, refer to the
NonStop NS-Series Planning Guide or the Fibre-Channel
ServerNet Adapter Installation and Support Guide. For more information on the Fibre
Channel disk module (FCDM), see Fibre Channel Disk Module
on page 5-9. For
examples of cable connections between FCSAs and FCDMs, see Example
Configurations of the IOAM Enclosure and Fibre Channel Disk Module on page 6-14
This illustration shows an FCSA with indicators and ports (used and not used) in
Integrity NonStop NS1000 systems:
Topic Page
Factory-Default Locations for Disk Volumes
6-12
Configurations for Fibre Channel Devices 6-12
Configuration Restrictions for Fibre Channel Devices 6-12
Recommendations for Fibre Channel Device Configuration 6-13
Example Configurations of the IOAM Enclosure and Fibre Channel Disk
Module
6-14
VST001.vsd
Ethernet Ports
(not used)
Fibre Channel
Port 2
Fibre Ethernet
Ports (not used)
Fibre Channel
Port 1
FCSA
FCSA