NonStop NS1000 Planning Guide (H06.05+)

System Configuration Guidelines
HP Integrity NonStop NS1000 Planning Guide—542527-004
6-15
Example Configurations of the IOAM Enclosure and
Fibre Channel Disk Module
Two FCSAs, Two FCDMs, One IOAM Enclosure
This illustration shows example cable connections between two FCSAs and the
primary and mirror Fibre Channel disk modules:
This table lists the FCSA group-module-slot-port (GMSP) and disk
group-module-shelf-bay (GMSB) identification for the factory-default system disk
locations in the configuration of two FCSAs, two Fibre Channel disk modules, and one
IOAM enclosure:
Disk Volume Name FCSA GMSP Disk GMSB
*
$SYSTEM (primary) 100.2.3.1 and 100.3.3.1 100.231.101
$DSMSCM (primary) 100.2.3.1 and 100.3.3.1 100.231.102
$AUDIT (primary) 100.2.3.1 and 100.3.3.1 100.231.103
$OSS (primary) 100.2.3.1 and 100.3.3.1 100.231.104
$SYSTEM (mirror) 100.2.3.2 and 100.3.3.2 100.231.101
$DSMSCM (mirror) 100.2.3.2 and 100.3.3.2 100.231.102
$AUDIT (mirror) 100.2.3.2 and 100.3.3.2 100.231.103
$OSS (mirror) 100.2.3.2 and 100.3.3.2 100.231.104
*
For an illustration of the factory-default slot locations for the Fibre Channel disk module,
see Factory-Default Locations for Disk Volumes on page 6-12.
FCSA
IOAM
Enclosure
VST088.vsd
FCSA
Fibre Channel
Cables
Fibre Channel
Cables
Mirror
FCDM
Primary
FCDM