NonStop NS1000 Planning Guide (H06.05+)

System Configuration Guidelines

HP Integrity NonStop NS1000 Planning Guide—542527-004

6-16

Example Configurations of the IOAM Enclosure and

Fibre Channel Disk Module

Four FCSAs, Four FCDMs, One IOAM Enclosure

This illustration shows example cable connections between the four FCSAs and the

two sets of primary and mirror Fibre Channel disk modules:

This table lists the FCSA group-module-slot-port (GMSP) and disk

group-module-shelf-bay (GMSB) identification for the factory-default system disk

locations in the configuration of four FCSAs, four Fibre Channel disk modules, and one

IOAM enclosure:

Disk Volume Name FCSA GMSP Disk GMSB

$SYSTEM (primary 1) 100.2.3.1 and 100.3.3.1 100.231.101

$DSMSCM (primary 1) 100.2.3.1 and 100.3.3.1 100.231.102

$AUDIT (primary 1) 100.2.3.1 and 100.3.3.1 100.231.103

$OSS (primary 1) 100.2.3.1 and 100.3.3.1 100.231.104

$SYSTEM (mirror 1) 100.2.3.2 and 100.3.3.2 100.232.101

$DSMSCM (mirror 1) 100.2.3.2 and 100.3.3.2 100.232.102

$AUDIT (mirror 1) 100.2.3.2 and 100.3.3.2 100.232.103

$OSS (mirror 1) 100.2.3.2 and 100.3.3.2 100.232.104

For an illustration of the factory-default slot locations for the Fibre Channel disk module,

see Factory-Default Locations for Disk Volumes on page 6-12.

VST089.vsd

IOAM Enclosure

Primary

FCDM1

FCSAs

Primary

FCDM 2

Mirror

FCDM1

Mirror

FCDM 2