NonStop NS1000 Planning Guide (H06.05+)

System Configuration Guidelines
HP Integrity NonStop NS1000 Planning Guide—542527-004
6-23
PDU Strapping Configurations
No TFTP or WANBOOT process is configured for new NonStop systems.
OSM Service Connection provides the location of the resource by adding an identifying
suffix to the names of all the system resources. Other interfaces, such as SCF, also
provide means to locate named resources.
PDU Strapping Configurations
PDUs are factory-strapped for the type and voltage of AC power at the intended
installation site for the system. If necessary, a licensed electrician or trained service
provider can change the strapping in the field.
Note. Naming conventions or configurations for the dedicated service LAN TCP/IP are the
same as the TCP/IP conventions used with G-series RVUs. The names are $ZTCP0 and
$ZTCP1.
Note. For current PDU strapping configurations, contact your HP product representative.