NonStop NS1000 Planning Guide (H06.05+)

HP Integrity NonStop NS1000 Planning Guide—542527-004
7-1
7 Example Configurations
This section shows example hardware component configurations within a modular
cabinet for an Integrity NonStop NS1000 server. A number of other configurations are
also possible because of the flexibility inherent to the NonStop value architecture and
ServerNet.
Topics include:
Maximum Number of Modular Components
This table shows the maximum number of the modular components installed in a
system. These values might not reflect the system you are planning and are provided
only as an example, not as exact values.
Note. Hardware configuration drawings in this appendix represent the physical arrangement of
the modular enclosures but do not provide information about PDUs. For current information
about PDUs and AC power distribution, contact your HP product representative.
Topic Page
Maximum Number of Modular Components
7-1
Typical Configurations 7-2
Example U Locations for Modular Enclosures 7-7
Example of 2-processor System Cabling 7-8
Enclosure or
Component
Integrity NonStop NS1000 system
2-processor 4-processor 6-processor 8-processor
Blade element
(HP Integrity
rx2620 server)
2468
IOAM
enclosure
1111
FCSA Up to 6 in
mixture set
by disks and
I/O
Up to 6 in
mixture set
by disks and
I/O
Up to 6 in
mixture set
by disks and
I/O
Up to 6 in
mixture set
by disks and
I/O
G4SA
Fibre Channel
disk module
16 16 16 16
Fibre Channel
disk drives
244 244 224 224