NonStop NS1000 Planning Guide (H06.06+)

Example Configurations
HP Integrity NonStop NS1000 Planning Guide—542527-002
7-2
Typical Configurations
Typical Configurations
This subsection shows the U locations of modular hardware configurations that can be
installed in the specified system. These options can be installed in locations marked
Available Space in the configuration drawings:
•
Maintenance switch: 1U required
•
Console: 2U required, with recommended installation at cabinet offset 20U
•
Fibre Channel disk module: 3U required
Topics covered are:
HP R5500 XR
UPS
112
1
2
1
Extended
runtime module
(ERM)
224
1
4
1
1
This configuration uses two 42U modular cabinets with one UPS at offset 2U and up to two ERMs
installed directly above the UPS in each cabinet.
Topic Page
2-Processor System
7-3
4-Processor System 7-4
6-Processor System 7-5
8-Processor System 7-6
2-Processor System With UPS and ERM 7-7
4-Processor System With UPS and ERM 7-8
6-Processor System With UPS and ERM 7-9
8-Processor System With UPS and ERM 7-10
Enclosure or
Component
(page 2 of 2)
Integrity NonStop NS1000 system (page 2 of 2)
2-processor 4-processor 6-processor 8-processor